filename: tfs 1038.doc version 1.2 07.05.2014 vectron international filter specification tfs 1038 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: t.b.d. output: t.b.d. characteristics remark: the maximum attenuation in the passband is defined as the insertion loss a e . the nominal frequency f n is fixed at 1038 mhz without any tolerance or limi t. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss a e 2.3 db max. 3.5 db (reference level) nominal frequency f n - 1038.0 mhz passband pb - f n 6.0 mhz passband ripple 0.24 db max. 1.2 db bandwidth bw 1.2 db 56 mhz min. 12 mhz absolute attenuation a abs 0.3 mhz ? 900 mhz 51.5 mhz min. 50 db 900 mhz ? 950 mhz 48 mhz min. 40 db 1150 mhz ? 1190 mhz 39 mhz min. 20 db 1190 mhz ? 1270 mhz 46 mhz min. 25 db 1270 mhz ? 1400 mhz 46 mhz min. 40 db 1400 mhz ? 1800 mhz 43 mhz min. 30 db return loss 19 min. 10 db input power level - max. 0 dbm operating temperature range otr - - 40 c ... + 85c storage temperature range - - 40 c ... + 85c temperature coefficient of frequency tc f * -75 ppm/k *) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f cat (mhz) generated: checked / approved:
filename: tfs 1038.doc version 1.2 07.05.2014 vectron international filter specification tfs 1038 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1,2 max. 0,6 3,0 +/-0,15 0,6 1,5 0,6 6 0 g r d . 1 3 7 5 date code 50 test circuit l1 saw l2 2 6 1, 3, 4, 5, 7, 8 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground date code: year + week e 2014 f 2015 g 2016 ... 138 318 498 678 858 1038 1218 1398 1578 1758 1938 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 998 1006 1014 1022 1030 1038 1046 1054 1062 1070 1078 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db 998 1006 1014 1022 1030 1038 1046 1054 1062 1070 1078 0 3 6 9 frequency in mhz vswr a38 e19
filename: tfs 1038.doc version 1.2 07.05.2014 vectron international filter specification tfs 1038 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or g respec tively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 1038.doc version 1.2 07.05.2014 vectron international filter specification tfs 1038 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1038.doc version 1.2 07.05.2014 vectron international filter specification tfs 1038 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 generation of development specification strehl 30.08.2007 1.1 generation of filter specification s.springfeldt 25.09.2008 1.2 maximum input power updated molke 07.05.2014
|
